Zsolt Istvan: 12/08/11

Hummer Information

Hummer H1

By 2008, Hummer's viability in the economic downturn was being questioned, and it was placed under review by GM management. Rather than being transferred to Motors Liquidation Company as part of the GM bankruptcy in 2009, the brand was retained by GM, in order to investigate its sale.

In 2009, a Chinese manufacturer, Sichuan Tengzhong Heavy Industrial Machinery Company, announced that it would acquire Hummer, pending government approvals, but later withdrew its bid. On February 24, 2010, Reuters reported that the Chinese ministry of commerce had prevented the deal, although a ministry spokesperson denied rejecting the application, which had been stalled for eight months. At the end of February, General Motors announced it would begin dismantling the Hummer brand.

Although the automaker announced two days later that it had been approached with new offers, by April 2010, any sale became unlikely, as inventory was depleted and Hummer dealerships began shutting down. After filling a rental-car fleet order, the last Hummer H3 rolled off the line at Shreveport on May 24, 2010.

History

Origin
The original Hummers were first designed and built by AM General Corporation, which was formerly AMC-Jeep's General Products division, in its Mishawaka, Indiana, assembly plant. The vehicles were created under a contract for the United States armed forces. The first model, the Humvee, was built in a variety of military-based equipment and versions. The US$1.2 billion contract won by AM General in 1983 was to produce 55,000 Humvees by 1985, which was later increased by 15,000 additional units.

AM General had planned to sell a civilian version of the Humvee as far back as the late 1980s. Having the same structure and most mechanical components, the civilian Hummers were finished in automotive gloss paint, adding passenger car enhancements such as air conditioning, sound insulation, upgraded upholstery, stereo systems, wood trim, and convenience packages. The civilian model began in part because of the persistence of Arnold Schwarzenegger, who saw an Army convoy while filming a movie.

In 1990, two matching white Humvees were driven from London to Beijing over the rough roads of central Soviet Union. The Hummers made the trip with ease, for they were built to drive on off-road terrain. The highlights of this journey were broadcast in the United States on ESPN. This publicity would pale in comparison to the attention that the Humvee received for its service in Gulf War Operation: Desert Storm, the following year. Also, a privately-owned Humvee was modified into the first Snow-Vee, including the addition of caterpillar tracks, a new rear compartment and a new engine. This vehicle was designed for use in and just below the Arctic Circle, and the Antarctic.

Hummer H2

In 1992, AM General began selling a civilian version of the M998 Humvee vehicle to the public under the brand name "Hummer".

GM purchase
In December 1999, AM General sold the brand name to General Motors, but continued to manufacture the vehicles. GM was responsible for the marketing and distribution of all Hummers produced by AM General. Shortly thereafter, GM introduced two of its own design models, the H2 and H3, and renamed the original vehicle H1. AM General continued to build the H1 until it was discontinued in 2006, and was contracted by GM to produce the H2. The H3 was built in Shreveport, LA alongside the Chevrolet Colorado and GMC Canyon pickups, with which it shared the GMT-355 platform (modified and designated GMT-345).

By 2006, the Hummer began to be exported and sold through importers and distributors in 33 countries. On October 10, 2006, GM began producing the Hummer H3 at its Port Elizabeth plant in South Africa for international markets. The Hummers built there at first were only left-hand drive, but right-hand drive versions were added and exported to Australia and other markets.

The H2 was also assembled in Kaliningrad, Russia, by Avtotor, starting in 2006 and ending in 2009. The plant produced a few hundred vehicles annually, and its output was limited to local consumption with five dealers in Russia.

On June 3, 2008, one day prior to GM's annual shareholder meeting, Rick Wagoner, GM's CEO at that time, said the brand was being reviewed, and had the possibility of either being sold, having the production line completely redesigned, or being discontinued. This was due to the decreasing demand for large SUVs as a result of higher oil prices. Almost immediately after the announcement, a pair of Indian automakers, including Mahindra & Mahindra, expressed interest in purchasing all or part of Hummer.

GM President Fritz Henderson stated several interested parties approached GM regarding the Hummer business. On April 5, 2009, Société de Participation Financière Eidos Canada Inc. (Eidos) made an unsolicited bid for Hummer.

Hummer H3

Failed sale
On June 1, 2009, as a part of the General Motors bankruptcy announcement, the company revealed that the Hummer brand would be discontinued. However, the following day GM announced that instead it had reached a deal to sell the brand to an undisclosed buyer. After GM announced that same day that the sale was to an undisclosed Chinese company, CNN and the New York Times identified the buyer of the Hummer truck unit as China-based Sichuan Tengzhong Heavy Industrial Machinery Company Ltd. Later that day, Sichuan Tengzhong itself announced the deal on their own website.

On January 6, 2010, GM CEO Ed Whitacre said he hopes to close the deal with Tengzhong by the end of January 2010. On February 1, 2010 it was announced that Sichuan and General Motors had agreed to extend the deadline until the end of February as Sichuan tried to get approval by the Chinese government. It was also revealed that the price tag of the Hummer brand was $150 million.

Later, on February 24, 2010, GM announced the Tengzhong deal had collapsed and the Hummer brand would soon shut down. There were reports that Sichuan Tengzhong might pursue the purchase of the Hummer brand from GM by purchasing it privately through the company's new J&A Tengzhong Fund SPC, a private equity investment fund owned by an offshore entity that was recruiting private investors to buy into its acquisition plan. The financial markets posed problems for established borrowers and even more for Tengzhong, a little-known company from western China, at the same time as the potential value of the Hummer brand continued to decline given high fuel prices and weak consumer demand.

The company announced it was willing to consider offers for all or part of the assets. American company Raiser along with several others expressed interest in buying the company. However, on April 7, 2010, this attempt failed as well, and General Motors officially said it was shutting down the Hummer SUV brand and offering rich rebates in a bid to move the remaining 2,200 vehicles.

Models

Hummer H1
The first vehicle in the Hummer range was the Hummer H1, based on the Humvee. Originally released in 1992, this vehicle was designed by American Motors' AM General subsidiary for the U.S. Military. Five years previously, AMC had been bought by Chrysler.

Humvee

Hummer H2
The Hummer H2 was the second vehicle in the Hummer range. There were two variations: The H2 SUV and H2 SUT.

Hummer H3
The H3 was the smallest of the Hummer models and is based on the GMT355 platform shared with the Chevrolet Colorado and GMC Canyon compact pickup trucks.

Hummer concept car
The Hummer HX was developed in 2008 as an open-air, two-door off-road concept car, smaller than other Hummer models.

Plug-in Hybrid
Raser Technologies of Utah was to use technology similar to that in the Chevy Volt. Raser unveiled the prototype the 2009 Society of Automotive Engineers World Congress in Detroit. Using their E-REV (Extended-Range Electric Vehicle) powertrain technology, the Hummer plug-in hybrid would run up to 40 miles per day on its battery alone, then a small 4-cylinder internal combustion engine would start to generate more electricity.

Hummer Videos

Below you can find Hummer Videos:

Hummer H3 Photos

Hummer was a brand of trucks and SUVs, first marketed in 1992 when AM General began selling a civilian version of the M998 Humvee. In 1998, General Motors (GM) purchased the brand name and marketed three vehicles: the original Hummer H1, based on the Humvee; and the H2 and H3 models that were based on smaller, civilian-market GM platforms.

The Hummer H3 was a crossover SUV/Sport Utility Truck from General Motors' Hummer division introduced in 2005 based on the GMT355 underpinning the Chevrolet Colorado and GMC Canyon compact pickup trucks. Produced at GM's Shreveport, Louisiana factory and the Port Elizabeth plant in South Africa the H3 was the smallest among the Hummer models, and the first to be built by GM. It was available either as a traditional midsize SUV or as a midsize pickup known as the H3T.

Below you can find Hummer H3 Photos, hope you like them. I'll be updating the blog with latest Hummer H3 Photos as often as possible.

Hummer H2 Photos

Hummer was a brand of trucks and SUVs, first marketed in 1992 when AM General began selling a civilian version of the M998 Humvee. In 1998, General Motors (GM) purchased the brand name and marketed three vehicles: the original Hummer H1, based on the Humvee; and the H2 and H3 models that were based on smaller, civilian-market GM platforms.

The Hummer H2 is an SUV and SUT that was marketed by General Motors under the Hummer brand. It is a large truck (slimmer than the Hummer H1), while longer, heavier (~6600 lbs.), and taller with room for six passengers (including driver), seven passengers in some models. The rearmost part of the H2 SUV was modified to a pickup truck bed for the 2005 H2 SUT ("Sport Utility Truck"). The Hummer H2 was the only one of the trucks to have the letters HUMMER between the grille.

Below you can find Hummer H2 Photos, hope you like them. I'll be updating the blog with latest Hummer H2 Photos as often as possible.

Hummer H1 Photos

Hummer was a brand of trucks and SUVs, first marketed in 1992 when AM General began selling a civilian version of the M998 Humvee. In 1998, General Motors (GM) purchased the brand name and marketed three vehicles: the original Hummer H1, based on the Humvee; and the H2 and H3 models that were based on smaller, civilian-market GM platforms.

The Hummer H1 is a civilian off-road vehicle based on the M998 Humvee, which was created by AM General. The vehicle was produced from 1992 through 2006, and was the first of what became the Hummer line. It was initially known only as the "Hummer"; however, in 1999 in a joint venture between General Motors and AM General, GM began marketing the Hummer H2, which was built on the Chevrolet Tahoe chassis. It was at this point that the original Hummer was given the H1 designation. For collectors, the most desirable model is the H1 Alpha, produced in the final model year of 2006. It had the most powerful engine and the best fuel mileage of the H1 vehicles. Overall, the H1 was a very limited production vehicle.

Below you can find Hummer H1 Photos, hope you like them. I'll be updating the blog with latest Hummer H1 Photos as often as possible.

Hummer Photos HD

Hummer Photos

Harley Davidson Information

Harley Davidson

The company sells heavyweight (over 750 cc) motorcycles designed for cruising on the highway. Harley-Davidson motorcycles (popularly known as "Harleys") have a distinctive design and exhaust note. They are especially noted for the tradition of heavy customization that gave rise to the chopper style of motorcycle. Except for the modern VRSC model family, current Harley-Davidson motorcycles reflect the styles of classic Harley designs. Harley-Davidson's attempts to establish itself in the light motorcycle market have met with limited success and have largely been abandoned since the 1978 sale of its Italian Aermacchi subsidiary.

Harley-Davidson sustains a loyal brand community which keeps active through clubs, events, and a museum. Licensing of the Harley-Davidson brand and logo accounted for $40 million (0.8%) of the company's net revenue in 2010.

Beginning
Clockwise from top left: William S. Harley, William A. Davidson, Walter Davidson, Sr., Arthur Davidson

In 1901, William S. Harley, age 21, drew up plans for a small engine with a displacement of 7.07 cubic inches (116 cc) and four-inch (102 mm) flywheels. The engine was designed for use in a regular pedal-bicycle frame. Over the next two years, Harley and his childhood friend Arthur Davidson labored on their motor-bicycle using the northside Milwaukee machine shop at the home of their friend, Henry Melk. It was finished in 1903 with the help of Arthur's brother, Walter Davidson. Upon completion, the boys found their power-cycle unable to conquer Milwaukee's modest hills without pedal assistance. Will Harley and the Davidsons quickly wrote off their first motor-bicycle as a valuable learning experiment.

Harley Davidson 48

Work immediately began on a new and improved second-generation machine. This first "real" Harley-Davidson motorcycle had a bigger engine of 24.74 cubic inches (405 cc) with 9.75 inches (25 cm) flywheels weighing 28 lb (13 kg). The machine's advanced loop-frame pattern was similar to the 1903 Milwaukee Merkel motorcycle (designed by Joseph Merkel, later of Flying Merkel fame). The bigger engine and loop-frame design took it out of the motorized-bicycle category and would help define what a modern motorcycle should contain in the years to come. The boys also received help with their bigger engine from outboard motor pioneer Ole Evinrude, who was then building gas engines of his own design for automotive use on Milwaukee's Lake Street.

The prototype of the new loop-frame Harley-Davidson was assembled in a 10 × 15 ft (3.0 × 4.6 m) shed in the Davidson family backyard. Most of the major parts, however, were made elsewhere, including some probably fabricated at the West Milwaukee railshops where oldest brother William A. Davidson was then toolroom foreman. This prototype machine was functional by September 8, 1904, when it competed in a Milwaukee motorcycle race held at State Fair Park. It was ridden by Edward Hildebrand and placed fourth. This is the first documented appearance of a Harley-Davidson motorcycle in the historical record.

In January 1905, small advertisements were placed in the "Automobile and Cycle Trade Journal" that offered bare Harley-Davidson engines to the do-it-yourself trade. By April, complete motorcycles were in production on a very limited basis. That year, the first Harley-Davidson dealer, Carl H. Lang of Chicago, sold three bikes from the dozen or so built in the Davidson backyard shed. (Some years later the original shed was taken to the Juneau Avenue factory where it would stand for many decades as a tribute to the Motor Company's humble origins.

Unfortunately, the first shed was accidentally destroyed by contractors in the early 1970s during a clean-up of the factory yard.)

In 1906, Harley and the Davidson brothers built their first factory on Chestnut Street (later Juneau Avenue). This location remains Harley-Davidson's corporate headquarters today. The first Juneau Avenue plant was a 40 × 60 ft (12 × 18 m) single-story wooden structure. The company produced about 50 motorcycles that year.

Harley Davidson

Model families
Modern Harley-branded motorcycles fall into one of five model families: Touring, Softail, Dyna, Sportster and Vrod. These model families are distinguished by the frame, engine, suspension, and other characteristics.

Touring
The touring family, also known as "dressers", includes Road King, Road Glide, and Electra Glide models offered in various trim. The Road Kings have a "retro cruiser" appearance and are equipped with a large clear windshield. Road Kings are reminiscent of big-twin models from the 1940s and 1950s. Electra Glides can be identified by their full front fairings. Most Electra Glides sport a fork-mounted fairing referred to as the "Batwing" due to its unmistakable shape. The Road Glide and Road Glide Ultra Classic have a frame-mounted fairing, referred to as the "Sharknose". The Sharknose includes a unique, dual front headlight.

Touring models are distinguishable by their large saddlebags, rear coil-over air suspension and are the only models to offer full fairings with Radios/CBs. All touring models use the same frame, first introduced with a Shovelhead motor in 1980, and carried forward with only modest upgrades until 2009, when it was extensively redesigned. The frame is distinguished by the location of the steering head in front of the forks and was the first H-D frame to rubber mount the drivetrain to isolate the rider from the vibration of the big V-twin.

The frame was modified for the 1994 model year when the oil tank went under the transmission and the battery was moved inboard from under the right saddlebag to under the seat. In 1997, the frame was again modified to allow for a larger battery under the seat and to lower seat height. In 2007, Harley introduced the 96-cubic-inch (1,570 cc) engine, as well the six-speed transmission to give the rider better speeds on the highway.

In 2006, Harley introduced the FLHX Street Glide, a bike designed by Willie G. Davidson to be his personal ride, to its touring line.

In 2008, Harley added anti-lock braking systems and cruise control as a factory installed option on all touring models. Also new for 2008 is the 6-US-gallon (23 l; 5.0 imp gal) fuel tank for all touring models.

For the 2009 model year, Harley-Davidson has redesigned the entire touring range with several changes, including a new frame, new swingarm, a completely revised engine-mounting system, 17-inch (430 mm) front wheels for all but the FLHRC Road King, and a 2–1–2 exhaust. The changes result in greater load carrying capacity, better handling, a smoother engine, longer range and less exhaust heat transmitted to the rider and passenger. Also released for the 2009 model year is the FLHTCUTG Tri-Glide Ultra Classic, the first three-wheeled Harley since the Servi-Car was discontinued in 1973. The model features a unique frame and a 103-cubic-inch (1,690 cc) engine exclusive to the trike.

Harley Davidson Softail

Softail
These big-twin motorcycles capitalize on Harley's strong value on tradition. With the rear-wheel suspension hidden under the transmission, they are visually similar to the "hardtail" choppers popular in the 1960s and 1970s, as well as from their own earlier history. In keeping with that tradition, Harley offers Softail models with "Springer" front ends and "Heritage" styling that incorporate design cues from throughout their history.

Dyna
Dyna-frame motorcycles were developed in the 1980s and early 1990s and debuted in the 1991 model year with the FXDB Sturgis offered in limited edition quantities. In 1992 the line continued with the limited edition FXDB Daytona and a production model FXD Super Glide. The new DYNA frame featured big-twin engines and traditional styling. They can be distinguished from the Softail by the traditional coil-over suspension that connects the swingarm to the frame, and from the Sportster by their larger engines. On these models, the transmission also houses the engine's oil reservoir.

Prior to 2008, Dyna models typically featured a narrow, XL-style front fork and front wheel, which the manufacturer included the letter "X" in the model designation to indicate. This lineup traditionally included the Super Glide (FXD), Super Glide Custom (FXDC), Street Bob (FXDB), and Low Rider (FXDL). One exception was the Wide Glide (FXDWG), which maintained the thickness of the XL forks and a narrow front wheel, but positioned the forks on wider triple-trees that give a beefier appearance. In 2008, the Dyna Fat Bob (FXDF) was introduced to the Dyna lineup, featuring aggressive styling like a new 2–1–2 exhaust, twin headlamps, a 180 mm rear tire, and, for the first time in the Dyna lineup, a 130 mm front tire. For the 2012 model year, the Dyna Switchback (FLD) became the first Dyna to break the tradition of having an FX model designation: with the fatter fork tubes, wide front tire, and full fender, this new front end resembled the big-twin FL models from previous decades better than the XL.

The Dyna family used the 88-cubic-inch (1,440 cc) twin cam from 1999 to 2006. In 2007, the displacement was increased to 96 cubic inches (1,570 cc) as the factory increased the stroke to 4.375 inches (111.1 mm). For the 2012 model year, the manufacturer began to offer some Dyna models with the 103-cubic-inch (1,690 cc) upgrade.

Harley Davidson Sportster

Sportster
Introduced in 1957, the Sportster family were conceived as racing motorcycles, and were popular on dirt and flat-track race courses through the 1960s and 1970s. Smaller and lighter than the other Harley models, contemporary Sportsters make use of 883 cc or 1,200 cc Evolution engines and, though often modified, remain similar in appearance to their racing ancestors.
Up until the 2003 model year, the engine on the Sportster was rigidly mounted to the frame. The 2004 Sportster received a new frame accommodating a rubber-mounted engine. Although this made the bike heavier and reduced the available lean angle, it reduced the amount of vibration transmitted to the frame and the rider. The rubber mounted engine provides a significantly smoother ride for rider and passenger, allowing longer trips.

In the 2007 model year, Harley-Davidson celebrated the 50th anniversary of the Sportster and produced a limited edition called the XL50, of which only 2000 were made for sale worldwide. Each motorcycle was individually numbered and came in one of two colors, Mirage Pearl Orange or Vivid Black. Also in 2007, electronic fuel injection was introduced to the Sportster family, and the Nightster model was introduced in mid-year. In 2009, Harley-Davidson added the Iron 883 to the Sportster line, the newest in the Dark Custom series.

In the 2008 model year, Harley-Davidson released the XR1200 Sportster in Europe, Africa, and the Middle East. The XR1200 had an Evolution engine tuned to produce 91 bhp (68 kW), four-piston dual front disc brakes, and an aluminum swing arm. Motorcyclist featured the XR1200 on the cover of its July 2008 issue and was generally positive about it in their "First Ride" story, in which Harley-Davidson was repeatedly asked to sell it in the United States. One possible reason for the delayed availability in the United States was the fact that Harley-Davidson had to obtain the "XR1200" naming rights from Storz Performance, a Harley customizing shop in Ventura, Calif. The XR1200 was released in the United States in 2009 in a special color scheme including Mirage Orange highlighting its dirt-tracker heritage. The first 750 XR1200 models in 2009 were pre-ordered and came with a number 1 tag for the front of the bike, autographed by Kenny Coolbeth and Scott Parker and a thank you/welcome letter from the company, signed by Bill Davidson.

Harley Davidson V-Rod

VRSC
V-Rod in a gravel driveway.
Introduced in 2001, the VRSC family bears little resemblance to Harley's more traditional lineup. Competing against Japanese and American muscle bikes and seeking to expand its market appeal, the "V-Rod" makes use of an engine developed jointly with Porsche that, for the first time in Harley history, incorporates overhead cams and liquid cooling. The V-Rod is visually distinctive, easily identified by the 60-degree V-Twin engine, the radiator and the hydroformed frame members that support the round-topped air cleaner cover. Based on the VR-1000 racing motorcycle, it continues to be a platform around which Harley-Davidson builds drag-racing competition machines.

In 2008, Harley added the anti-lock braking system as a factory installed option on all VRSC models. Harley also increased the displacement of the stock engine from 1,130 to 1,250 cc (69 to 76 cu in), which had only previously been available from Screamin' Eagle, and added a slipper clutch as standard equipment.

VRSC Models Include:
VRSCA: V-Rod (2002–2006), VRSCAW: V-Rod (2007–2010), VRSCB: V-Rod (2004–2005), VRSCD: Night Rod (2006–2008), VRSCDX: Night Rod Special (2007–2010), VRSCSE: Screamin' Eagle CVO V-Rod (2005), VRSCSE2: Screamin' Eagle CVO V-Rod (2006), VRSCR: Street Rod (2006–2007), VRSCX: Screamin' Eagle Tribute V-Rod (2007), VRSCF: V-Rod Muscle (2009–2010).

VRXSE
The VRXSE V-Rod Destroyer is Harley-Davidson's production drag racing motorcycle, constructed to run the quarter mile in under ten seconds. It is based on the same revolution engine that powers the VRSC line, but the VRXSE uses the Sceamin' Eagle 1,300 cc "stroked" incarnation, featuring a 75 mm crankshaft, 105 mm Pistons, and 58 mm throttle bodies.
The V-Rod Destroyer is not a street legal motorcycle.

Harley Davidson Photos HD

Harley Davidson V Rod Photos

Harley-Davidson, often abbreviated H-D or Harley, is an American motorcycle manufacturer. Founded in Milwaukee, Wisconsin, during the first decade of the 20th century, it was one of two major American motorcycle manufacturers to survive the Great Depression. Harley-Davidson also survived a period of poor quality control and competition from Japanese manufacturers.

Introduced in 2001, the VRSC family bears little resemblance to Harley's more traditional lineup. Competing against Japanese and American muscle bikes and seeking to expand its market appeal, the "V-Rod" makes use of an engine developed jointly with Porsche that, for the first time in Harley history, incorporates overhead cams and liquid cooling. The V-Rod is visually distinctive, easily identified by the 60-degree V-Twin engine, the radiator and the hydroformed frame members that support the round-topped air cleaner cover. Based on the VR-1000 racing motorcycle, it continues to be a platform around which Harley-Davidson builds drag-racing competition machines.

Below you can find Harley Davidson V Rod Photos, hope you like them. I'll be updating the blog with latest Harley Davidson V Rod Photos as often as possible.